EV ZLX-15P Speaker Power Supply Repair @hetztronics




Your EV speaker  Does not power on ????? check this out

By checking the fuse near power socket, find good, with the Multimeter on the power connector if the Power On switch worked,

Every visible parts working even sub woofer and speakers impedance all ok

There Must be fault with POWER Supply Unit, The cables are not very long, and are glued with white resin,

It’s not hard to open….Everything is well organized and modular inside sub where power supply located at bottom area.

You are welcome to bring just power supply or whole system to us, also you may bring whole case cover if able to

unscrew a metal case cover from sub body.

EV ZLX-15P OR (any other model) etc servicing and repair specialist.

We are servicing and repair specialist.

specialist in any EV ACTIVE OR PASSIVE Speaker. If your  EV ZLX-15P or any other

model in series showing  faults Such as Input channel not working, Speakers Crackling, blowing mains fuse, protect light,

Servicing  etc.

then please contact us we can fix it.

NOTE:-This listing is for Repair Service-We are Not Selling EV SPEAKER or part via This listing.

Mention first in listings are few of the problems, Please remember this is a Repair service so as a buyer or customer you will need to get the unit  to us at our tech. workshop ,

via in person drop off or post, Due weight and size we always ask customers to drop in and collection form our place – some cases we use parcel force to send speaker back to customer.

we wont able to send any information unless until service been agreed or book under diagnostic

If you would like to discuss or webchat or would like more info then please contact us via what’s app or sms or call 07447363658,

EV ZLX-15P  15″ powered loudspeaker

  • 1000 W (Class D); 127 dB max SPL; 42 Hz – 20 kHz
  • 15” woofer and 1.5” high-frequency titanium compression driver
  • 38.0 lbs (17.3 kg)
  • Coverage Horizontal x Vertical : 90° x 60°
  • Low Frequency Transducer : EVS-15L, 380 mm (15 in) Woofer
  • High Frequency Transducer : DH-1K
  • Input Connection : (2) XLR/TRS Combo Jack, (1) 3.5 mm Input, and (1) XLR link Output
  • Enclosure : Polypropylene
  • Grille : 18 Gauge Steel with Black Powder Coat
  • Dimensions (HxWx D) : 685 mm x 423mm x 383 mm (27 in x 17 in x 15in)



There are no reviews yet.

Be the first to review “EV ZLX-15P Speaker Power Supply Repair @hetztronics”