Description
Yamaha DXR10 Powered Speaker Repair & Service.
Speaker Power Supply Repair – Effect Repair – XLR Connector Replace/Repair @Hetztronics
Your Yamaha speaker Does not power on ????? check this out… by checking the fuse in power cable, find good, with the Multimeter on the power connector if the Power On switch worked,
Every visible parts working even sub woofer and speakers impedance all ok
There Must be fault with POWER Supply Unit, or AMPLIFIER or Inverter Fault
It’s bit hard to open….Everything is well organized and modular inside cabinet where power supply located at bottom area.You are welcome to bring just power supply or whole system to us, also you may bring PCB if able to unscrew a metal case cover from sub enclosure.
Yamaha DXR10 OR (any other model) etc servicing and repair specialist.
We are servicing and repair specialist.specialist in any YAMAHA ACTIVE OR PASSIVE Speaker. If your
Yamaha DXR10 or any other
model in series showing faults Such as Input channel not working, Speakers Crackling, blowing mains fuse, protect light, Servicing etc. then please contact us we can fix it.
NOTE:-This listing is for Repair Service-We are Not Selling Yamaha SPEAKER or part via This listing.
Mentions are in listings are few of the problems, Please remember this is a Repair service so as a buyer or customer you will need to get the unit to us at our tech-workshop, in person drop off or post, Due to weight and size we always ask customers to drop in and collection form our place – MANY Clients use UK /parcel force to send speaker to us and we use same/courier service return to customer.
we encourage to book repair under diagnostic procedure.
If you would like to discuss or webchat or would like more info then please contact us via what’s app or sms or call 07447363658 or what’s app message.
The Yamaha DXR10 is an active full-range PA speaker delivering 1100w of dynamic power.
The Yamaha DXR10 Active Loudspeaker is a two-way system with a 10 inch woofer and a peak output of 1100-watts. The powerful speaker is easy to transport yet ideal for a variety of applications thanks to an outstanding 131 dB SPL. An integrated 3-channel mixer makes it easy to amplify vocals and instruments with both mic and line level inputs. Clarity is consistent throughout all output levels with the Yamaha DXR10 thanks to intelligent dynamic control constantly monitoring frequency output. With FIR-X tuning. The speaker is housed in a non-resonant ABS enclosure.
-
Processors: D-CONTOUR :FOH / MAIN, MONITOR, OFF
- Speaker type: 10″ 2-way, Bi-amp powered speaker, Bass-reflex type
- Frequency range: -10dB 57Hz – 20kHz
- Components: LF – Diameter:8″ cone, Voice Coil:2″, Magnet:Ferrite; HF – Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite
- Crossover: FIR-X tuning™ (linear phase FIR filter)
- Output power: Dynamic:1100W (LF: 950W HF: 150W) / Continuous: 700W (LF: 600W HF: 100W)
- I/O connectors: INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1), LINK OUT: XLR x 1
- Input Voltage: 100V – 240V, 50Hz/60Hz
- Power consumption: 90W
- Flying and mounting hardware: Top x2, Rear x1 (Fits for M8 x 15mm eyebolts)
- Pole socket: 35mm with 2-way features (0 or 7 degrees)
- Dimensions: W – 280mm (11″); H – 458mm (18″); D – 280mm (11″)
- Net weight: 13.5kg (29.8lbs)
- Enclosure: Material: ABS (Matte Finish, Black)
Reviews
There are no reviews yet.