Dynacord Powermate PM600 / PM1000 Servicing REPAIRS Specialist

~~~~~~REPAIRS & SERVICING ~~~~~~~~

Dynacord PM 1000, PM 600,  PM 1600,  PM 2200-3 Power Supply & Amp Repair/Board repair (not Selling mixer)  @HETZTRONICS LTD

Dynacord Powermate PM 1000, PM600, PM1600, PM2200 or PM2200-3 etc servicing & repair restoration service.

We are Specialist in Dynacord repair. If your MIXER – AMPLIFIER showing faults Such as Input channel not working,Speakers Crackling,blowing mains fuse,protect light, FX problems,Faders issue,Liquid Spill, Liquid Damage,Servicing etc…then contact us we can fix it.

NOTE:-This listing is for Repair Service-We are Not Selling (any part /mixer)via this listing.

Mention in listing are few of  the general faults, Please remember this is a Repair service so as a buyer as customer you will need to take the unit to our tech workshop , via in person drop off OR post ~Courier.

We can Dispatch back to you via post the repaired unit back.

we wont able to send any information unless until service been purchase – 

If you would like to discuss or web-chat or would like more info then please contact us via what’s app or SMS/call 07447363658 or email us : info@hetztronics.com

NOTE: THE REPAIR COST  MAY VARY AS PER MIXER, THE COST IS GENERAL GUIDE OR AVERAGE OF SOME SUCCESSFUL REPAIR CARRIED OUT BY US

Diagnose (Fees may apply) carried out same time once we have mixer at our place. Setups and installs and upgrades at sensible prices. Quotations will be provided  before work carried out.

We are Tech Specialist. Highly experienced in Audio Electronics & engineering field. Trained & able to repair well known brand such as Sony, Hitachi, Panasonic, Yamaha, QSC, Mikie,Cambridge Audio, Toshiba, Bose, Denon and others.

The photos above in listing are actual repair of PM 1000 carried out at our place .

For Inspection we encourage buyer to call us for further procedure , describe your fault and model of unit and receive repair advice: there are lots of repairs and techniques available at our website and photo library. We can also advise on obsolete parts substitutions or modifications.

By arrangement and costs paid – Mixer for service can be collected and returned to your place from London U.K. 

 

 

DYNACORD PM2200-3 (Specifications as follows )

22 input channels (18 Mic/Line + 4 Mic/Stereo-Line) Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms 2 High-Quality editable effects, 100 factory and 20 user presets Professional 4×4 24-bit / 96 kHz USB interface with MIDI The PM2200-3 is the largest member of the PowerMate family.

It is by far the most powerful and best equipped compact powered mixer on the market. It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equaliser, USB audio interface and power amplifier. The mixing section starts with 22 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate?reverbs. Further, each preset can be edited and stored to 20 User memories. The built in USB audio interface shares 4 playback and four recording channels simultaneously with a PC or Mac, following studio standard 24bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package. The 11 band stereo graphic equalizer can be routed flexible to master or monitor channels. The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class D output stage. Channels (Mono + Stereo) 18 + 4 Auxiliarys (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable Max. Single Channel Output Power, Dynamic-Headroom, IHF-A into 2.66 Ω 2 x 1600 W into 4 Ω 2 x 1250 W into 8 Ω 2 x 675 W